Long-term effects of tributyltin compounds on the baltic amphipod, Gammarus oceanicus     

Roy Laughlin  Karin Nordlund  Olof Lindn 《Marine environmental research》1984,12(4):243-271

Amphipod larvae, Gammarus oceanicus, were exposed for 8 weeks to bis(tributyltin) oxide (TBTO) or tributyltin fluoride (TBTF), or for 5 weeks to leachates from tributyltin-containing antibiofouling paints. No larvae survived 8 weeks' exposure to 3 μg/litre TBTO or TBTF. Differential larval survival occurred during exposure to 0·3 gmg/litre of these same compounds. Paint leachates were shown to cause similar toxicity responses at comparable aqueous tributyltin concentrations. An examination of sublethal responses showed slight decreases in growth for larvae exposed to TBTO and to paint leachates, although responses at tributyltin levels below 1 μg/litre were not marked. Whole-animal oxygen consumption rates were not affected by low tributyltin exposure levels. While these studies demonstrate low level toxicity of tributyltins, effects on oxygen consumption and growth do not indicate a mode of action for these compounds.  相似文献   

Stratigraphic framework of gas accumulations in the Ría de Pontevedra (NW Spain)     

Ruth Durán  Soledad García-Gil  Raquel Diez  Federico Vilas 《Geo-Marine Letters》2007,27(2-4):77-88

Knowledge of marine geological environments in which shallow gas is accumulating is becoming increasingly important in global studies of climate change because a measurable proportion of the total methane source comes from continental margins. Previous studies have revealed that coastal environments represent important geological environments where microbial methane is being generated, is accumulating, and is being released. In the Ría de Pontevedra, at least 4.5 km² of seafloor in the innermost part of the ría is underlain by sediments containing natural gas. Seismic interpretation contributes new findings for the definition of periods and geological environments in which the gas could have been generated, and is accumulating and released in the Ría de Pontevedra. Groundtruthing the seismic data (facies, environments) makes it possible to identify favourable geological environments for gas generation in the sedimentary infill of the Ría de Pontevedra. Sequence stratigraphy based on high-resolution seismic profiles and post-Last Glacial Maximum sea-level records makes it possible to establish the stratigraphic architecture of the ría and to define the periods in which gas could have been generated. The results of this study show that the sedimentary infill is composed of a fifth-order sequence developed since the Last Glacial Maximum. Within this sequence, gas appears to have accumulated in the Holocene deposits associated with the latest transgressive and highstand system tracts. Seismic analysis shows that gas could have been generated in different geological environments in the Ría de Pontevedra. If coastal environments at times of lower sea level were similar to those of the present, organic-rich mud deposits (deposited mainly in lakes, estuaries and floodplains) could have survived transgression and remained buried as potential gas sources in the inner part of the ría.  相似文献   

In situ and satellite observations of the eastward migration of the Western Alboran Sea Gyre     

M.M. Flexas  D. Gomis  S. Ruiz  A. Pascual  P. Len 《Progress in Oceanography》2006,70(2-4):486

During October 2003 an intensive oceanographic survey (BIOMEGA) was carried out in the Alboran Sea, coinciding with a migration event of the Western Alboran Sea Gyre (WAG). The observations gathered during that cruise constitute the first field evidence of a migrated stage of the WAG. In this work we present the main differences between the 3D hydrodynamic fields observed during BIOMEGA and those corresponding to a WAG located at its usual position. The migration of the gyre was followed by satellite (altimetry and sea surface temperature) imagery. The causes of the gyre migration are explored in terms of the quasi-geostrophic tendency equation, in particular of the dynamics governing scales larger than the Rossby radius of deformation. It is shown that the steady state gyre must be almost equivalent barotropic and that the key process to break down the stationarity would be a density advection at gyre scale. The mechanisms to explain the migration of the WAG proposed by previous authors are discussed in light of the explanation proposed in this work.  相似文献   

Effects of crab–halophytic plant interactions on creek growth in a S.W. Atlantic salt marsh: A Cellular Automata model     

Darío R. Minkoff  Mauricio Escapa  Flix E. Ferramola  Silvio D. Maraschín  Jorge O. Pierini  Gerardo M.E. Perillo  Claudio Delrieux 《Estuarine, Coastal and Shelf Science》2006,69(3-4):403

The Bahía Blanca Estuary (38° 50′ S, and 62° 30′ W) presents salt marshes where interactions between the local flora (Sarcocornia perennis) and fauna (Chasmagnathus granulatus) generate some kind of salt pans that alter the normal water circulation and condition its flow and course towards tidal creeks. The crab–vegetation dynamics in the salt marsh presents variations that cannot be quantified in a reasonable period of time. The interaction between S. perennis plant and C. granulatus crab is based on simple laws, but its result is a complex biological mechanism that causes an erosive process on the salt marsh and favors the formation of tidal creeks. To study it, a Cellular Automata model is proposed, based on the laws deduced from the observation of these phenomena in the field, and then verified with measurable data within macroscale time units. Therefore, the objective of this article is to model how the interaction between C. granulatus and S. perennis modifies the landscape of the salt marsh and influences the path of tidal creeks. The model copies the basic laws that rule the problem based on purely biological factors.The Cellular Automata model proved capable of reproducing the effects of the interaction between plants and crabs in the salt marsh. A study of the water drainage of the basins showed that this interaction does indeed modify the development of tidal creeks. Model dynamics would likewise follow different laws, which would provide a different formula for the probability of patch dilation. The patch shape can be obtained changing the pattern that dilates.  相似文献   

Effect of Multipoint Heterogeneity on Nonlinear Transformations for Geological Modeling： Porosity-Permeability Relations Revisited     

J A Vargas-Guzmán 《中国地质大学学报(英文版)》2008,19(1):85-92

An analysis of statistical expected values for transformations is performed in this study to quantify the effect of heterogeneity on spatial geological modeling and evaluations. Algebraic transformations are frequently applied to data from logging to allow for the modeling of geological properties. Transformations may be powers, products, and exponential operations which are commonly used in well-known relations (e.g., porosity-permeability transforms). The results of this study show that correct computations must account for residual transformation terms which arise due to lack of independence among heterogeneous geological properties. In the case of an exponential porosity-permeability transform, the values may be positive. This proves that a simple exponential model back-transformed from linear regression underestimates permeability. In the case of transformations involving two or more properties, residual terms may represent the contribution of heterogeneous components which occur when properties vary together, regardless of a pair-wise linear independence. A consequence of power- and product-transform models is that regression equationswithin those transformations need corrections via residual cumulants. A generalization of this result isthat transformations of multivariate spatial attributes require multiple-point random variable relations. This analysis provides practical solutions leading to a methodology for nonlinear modeling using correct back transformations in geology.  相似文献   

Simulations of 3D DC borehole resistivity measurements with a goal-oriented <Emphasis Type="Italic">hp</Emphasis> finite-element method. Part II: through-casing resistivity instruments     

D. Pardo  C. Torres-Verdín  M. Paszynski 《Computational Geosciences》2008,12(1):83-89

We simulate direct current (DC) borehole resistivity measurements acquired in steel-cased deviated wells for the assessment of rock formation properties. The assumed data acquisition configuration considers one current (emitter) and three voltage (collector) electrodes that are utilized to measure the second difference of the electric potential along the well trajectory. We assume a homogeneous, 1.27-cm-thick steel casing with resistivity equal to 10^− 5 Ω· m. Simulations are performed with two different numerical methodologies. The first one is based on transferring two-dimensional (2D) axisymmetric optimal grids to a three-dimensional (3D) simulation software. The second one automatically produces optimal 3D grids yielded by a 3D self-adaptive goal-oriented algorithm. Both methodologies utilize high-order finite elements (FE) that are specially well-suited for problems with high-contrast coefficients and rapid spatial variations of the electric field, as it occurs in simulations that involve steel-cased wells. The method based on transferring 2D-optimal grids is efficient in terms of CPU time (few seconds per logging position). Unfortunately, it may produce inaccurate 3D simulations in deviated wells, even though the error remains below 1% for the axisymmetric (vertical) well. The method based on optimal 3D grids, although less efficient in terms of CPU time (few hours per logging position), produces more accurate results that are validated by a built-in a posteriori error estimator. This paper provides the first existing simulations of through-casing resistivity measurements in deviated wells. Simulated resistivity measurements indicate that, for a 30° deviated well, measurements in conductive layers 0.01 Ω· m) are similar to those obtained in vertical wells. However, in resistive layers (10,000 Ω· m), we observe 100% larger readings in the 30° deviated well. This difference becomes 3,000% for the case of a 60° deviated well. For this highly-deviated well, readings corresponding to the conductive formation layer are about 30% smaller in magnitude than those in a vertical well. Shoulder effects significantly vary in deviated wells.  相似文献   

Editors’ message: Eduardo Usunoff     

Leticia Rodríguez  Luis Sebastián Vives 《Hydrogeology Journal》2008,16(7):1237-1237

  相似文献   

Giant ancient landslide in the Alma water gap (Crimean Mountains,Ukraine): notes to the predisposition,structure, and chronology     

Tomáš Pánek  Jan Hradecký  Veronika Smolková  Karel Šilhán 《Landslides》2008,5(4):367-378

Large-scale ancient landslides of the area of more than 5 km² and volume exceeding 200 × 10⁶ m³ are characteristic features of the valleys incised in the northern periphery of the Crimean Mountains (Ukraine). The largely affected area is located in the outermost cuesta range of the Crimean Mountains which consists of rigid Sarmatian limestones overlying weak Middle Miocene and Upper Palaeogene deposits. A giant landslide arose in the Alma water gap as a reflection of several coincident preparatory factors such as suitable bedrock stratification, smectite-rich bedrock exposed to swelling activity, presence of faults parallel to the valley trend, and river capture event which preceded the landslide event. The occurrence of such ancient megaslides is particularly interesting in the area which is characterized by low precipitation (<500 mm/year) and weak contemporary seismicity. It probably reflects a more dynamic environment in humid phases of the Holocene; however, seismic triggering along the Mesozoic suture zone cannot be rejected. Compressional features such as gravitational folds in the central and distal parts of the landslide, which probably correlate with the whole landslide genesis or its significant reactivation, arose, according to the radiocarbon dating, during the Holocene climatic optimum in the Atlantic period. The slope deformation has been relatively quiescent since that time, except minor historic reactivization which took place in the frontal part of the landslide. We suppose that the studied landslide could be classified as a transitional type of slope deformation with some signs of spreading and translational block slides.  相似文献   

Provenance of the Bosnian Flysch     

Tamás Mikes  Dominik Christ  Rüdiger Petri  István Dunkl  Dirk Frei  Mária Báldi-Beke  Joachim Reitner  Klaus Wemmer  Hazim Hrvatović  Hilmar von Eynatten 《Swiss Journal of Geoscience》2008,101(1):31-54

Sandwiched between the Adriatic Carbonate Platform and the Dinaride Ophiolite Zone, the Bosnian Flysch forms a c. 3000 m thick, intensely folded stack of Upper Jurassic to Cretaceous mixed carbonate and siliciclastic sediments in the Dinarides. New petrographic, heavy mineral, zircon U/Pb and fission-track data as well as biostratigraphic evidence allow us to reconstruct the palaeogeology of the source areas of the Bosnian Flysch basin in late Mesozoic times. Middle Jurassic intraoceanic subduction of the Neotethys was shortly followed by exhumation of the overriding oceanic plate. Trench sedimentation was controlled by a dual sediment supply from the sub-ophiolitic high-grade metamorphic soles and from the distal continental margin of the Adriatic plate. Following obduction onto Adria, from the Jurassic–Cretaceous transition onwards a vast clastic wedge (Vranduk Formation) was developed in front of the leading edge, fed by continental basement units of Adria that experienced Early Cretaceous synsedimentary cooling, by the overlying ophiolitic thrust sheets and by redeposited elements of coeval Urgonian facies reefs grown on the thrust wedge complex. Following mid-Cretaceous deformation and thermal overprint of the Vranduk Formation, the depozone migrated further towards SW and received increasing amounts of redeposited carbonate detritus released from the Adriatic Carbonate Platform margin (Ugar Formation). Subordinate siliciclastic source components indicate changing source rocks on the upper plate, with ophiolites becoming subordinate. The zone of the continental basement previously affected by the Late Jurassic–Early Cretaceous thermal imprint has been removed; instead, the basement mostly supplied detritus with a wide range of pre-Jurassic cooling ages. However, a c. 80 Ma, largely synsedimentary cooling event is also recorded by the Ugar Formation, that contrasts the predominantly Early Cretaceous cooling of the Adriatic basement and suggests, at least locally, a fast exhumation.  相似文献   

Red dust rain within the Spanish Mediterranean area     

José Quereda Sala  Jorge Olcina Cantos  Enrique Montón Chiva 《Climatic change》1996,32(2):215-228

Dust rain belongs to the climatological conditions of the Iberian Peninsula's Mediterranean seaboard. Traditionally known as muddy' or bloody rains, red dust rain has become a topical issue as a result of more frequent rainfall of this kind in recent years. In spite of the difficulties that studying this phenomenon involves, owing to the lack of systematically kept records at meteorological observatories, details are provided of the high frequency of such phenomena within the Spanish Mediterranean area, using records from other phenological sources. The study analyzes the chemical composition of red dust rain and the atmospheric factors giving rise to such phenomena. Whether there is a relationship betwen the higher frequency of dust rain and possible changes in global atmospheric circulation is as yet unclear.  相似文献